Salutare.
Cum pot face mai multe servere TS3 pe IP-uri diferite cu port 9987 pe un VPS?
Servere TS3 VPS
Moderators: Moderatori ajutatori, Moderatori
- d e a l e r -
- Membru eXtream
- Posts: 2462
- Joined: 13 Feb 2016, 16:52
- Detinator Steam: Da
- CS Status: Connection lost
- Reputatie: Fost eXtream Mod
Fost Membru Club eXtreamCS (1 luna) - Fond eXtream: 0
- Location: Mediaş, Sibiu, România
- Discord: dealer1945
- Has thanked: 33 times
- Been thanked: 79 times
- Contact:
- Radu eXtream
- eXtream Mod
- Posts: 1775
- Joined: 12 Sep 2014, 20:32
- Detinator Steam: Da
- SteamID: /id/raducu7
- Reputatie: eXtream Mod
Fost Membru Club eXtreamCS (22 luni) - Fond eXtream: 0
- Location: Iași
- Discord: RaduSerifu
- Has thanked: 39 times
- Been thanked: 11 times
- Contact:
- d e a l e r -
- Membru eXtream
- Posts: 2462
- Joined: 13 Feb 2016, 16:52
- Detinator Steam: Da
- CS Status: Connection lost
- Reputatie: Fost eXtream Mod
Fost Membru Club eXtreamCS (1 luna) - Fond eXtream: 0
- Location: Mediaş, Sibiu, România
- Discord: dealer1945
- Has thanked: 33 times
- Been thanked: 79 times
- Contact:
- mariuss615
- Membru, skill +3
- Posts: 1399
- Joined: 16 Mar 2010, 10:24
- Detinator Steam: Da
- CS Status: Mahăr
- Reputatie: Organizator Cupe eXtreamCS
- Location: București
- Has thanked: 28 times
- Been thanked: 91 times
- Contact:
Extras din documentatia teamspeak:
Commandline parameters are passed to the TeamSpeak 3 Server using the form:
ts3server_<arch> <parameter1>=<value1> [<parameter2>=<value2>] ...
Important: All commandline parameters passed to the server need to be escaped
using the ServerQuery escape patterns (check the ServerQuery manual for details).
Example:
$ ./ts3server_minimal_runscript.sh clear_database=1 create_default_virtualserver=0
Commandline parameters are not saved over sessions, so if you passed paramaters
when starting the server process, you need to pass them again the next time. If
a parameter is not specified, the default value will be used, regardless of
parameters specified during a previous server start.
The following commandline parameters are available:
* default_voice_port (9987)
UDP port open for clients to connect to. This port is used by the first
virtual server, subsequently started virtual servers will open on increasing
port numbers.
Default: The default voice port is 9987.
* voice_ip (0.0.0.0)
IP on which the server instance will listen for incoming voice connections.
Default: The server is bound on any IP address.
Sau poti crea un ts3server.ini in care pui ceva de genul:
machine_id=
default_voice_port=9987
voice_ip=192.168.1.0,0:0:0:0:0:0:0:1
licensepath=
filetransfer_port=30033
filetransfer_ip=192.168.1.0,0:0:0:0:0:0:0:1
query_port=10011
query_ip=192.168.1.0,0:0:0:0:0:0:0:1
query_ip_whitelist=query_ip_whitelist.txt
query_ip_blacklist=query_ip_blacklist.txt
dbplugin=ts3db_sqlite3
dbpluginparameter=
dbsqlpath=sql/
dbsqlcreatepath=create_sqlite/
dbconnections=10
logpath=logs
logquerycommands=0
dbclientkeepdays=90
logappend=1
Apoi pornesti serverul cu :
./ts3server_minimal_runscript.sh inifile=ts3server.ini
Sper sa nu gresesc, nu am mai intaslat un server de ts de ceva timp.
Commandline parameters are passed to the TeamSpeak 3 Server using the form:
ts3server_<arch> <parameter1>=<value1> [<parameter2>=<value2>] ...
Important: All commandline parameters passed to the server need to be escaped
using the ServerQuery escape patterns (check the ServerQuery manual for details).
Example:
$ ./ts3server_minimal_runscript.sh clear_database=1 create_default_virtualserver=0
Commandline parameters are not saved over sessions, so if you passed paramaters
when starting the server process, you need to pass them again the next time. If
a parameter is not specified, the default value will be used, regardless of
parameters specified during a previous server start.
The following commandline parameters are available:
* default_voice_port (9987)
UDP port open for clients to connect to. This port is used by the first
virtual server, subsequently started virtual servers will open on increasing
port numbers.
Default: The default voice port is 9987.
* voice_ip (0.0.0.0)
IP on which the server instance will listen for incoming voice connections.
Default: The server is bound on any IP address.
Sau poti crea un ts3server.ini in care pui ceva de genul:
machine_id=
default_voice_port=9987
voice_ip=192.168.1.0,0:0:0:0:0:0:0:1
licensepath=
filetransfer_port=30033
filetransfer_ip=192.168.1.0,0:0:0:0:0:0:0:1
query_port=10011
query_ip=192.168.1.0,0:0:0:0:0:0:0:1
query_ip_whitelist=query_ip_whitelist.txt
query_ip_blacklist=query_ip_blacklist.txt
dbplugin=ts3db_sqlite3
dbpluginparameter=
dbsqlpath=sql/
dbsqlcreatepath=create_sqlite/
dbconnections=10
logpath=logs
logquerycommands=0
dbclientkeepdays=90
logappend=1
Apoi pornesti serverul cu :
./ts3server_minimal_runscript.sh inifile=ts3server.ini
Sper sa nu gresesc, nu am mai intaslat un server de ts de ceva timp.
Web Hosting gratuit cu SSL inclus si Litespeed pentru orice site care tine link in footer. PM daca te intereseaza.
-
- Information
-
Who is online
Users browsing this forum: > SKanDaL <, Bing [Bot], Coka Cola, d e a l e r -, Dot [Bot], Radu eXtream, Yandex [Bot] and 543 guests