Am un router wireless Cisco WAP200 si nu l-am folosit pentru ca ii se rupsesera antenele dar acum mi-a venit sa vad daca mai merge, l-am instalat acum circa 2 ani si nu mai stiu ce setari i-am facut, a ramas numele la retea si parola pusa atunci doar ca nu mai pot sa-mi dau seama cum l-am setat, am cautat pe net manualul, l-am gasit si am incercat sa-l setez ca si cum ar fi unul nou si nu reusesc sa accesez ip-ul care e scris in manual. Are cineva idee cum as putea sa umblu in el in asa fel incat sa fie "ca nou" ?
Nu veniti cu link-uri la manual sau altele de pe site-ul Cisco, le-am citit pe toate.
Resetare router wireless
Moderators: Moderatori ajutatori, Moderatori
- Vlad
- Fost administrator
- Posts: 8148
- Joined: 01 Dec 2011, 13:35
- Detinator Steam: Da
- CS Status: Inactiv
- Reputatie: Fost Administrator
Organizator Cupe eXtreamCS
Administratorul anului 2016; 2017 - Location: Bucuresti
- Has thanked: 116 times
- Been thanked: 161 times
M-ai lamurit. Stiu de butonul ala dar nu ma ajuta cu nimic, nu am probleme cu conexiunea, am cu altceva. Reciteste daca nu intelegi.#Vali wrote:Toate au un buton prin care sa le dai reset :)
- tictac
- Membru eXtream
- Posts: 4015
- Joined: 24 Feb 2012, 18:27
- Detinator Steam: Da
- Reputatie: 1 warn scos (-2 luni club)
Membru Club eXtreamCS (3 luni)
Ban 3 luni (achitat) - Location: Bihor, Oradea
- Has thanked: 73 times
- Been thanked: 570 times
Nu ai cum... daca e router cisco de ultima generatie, nu poti sa-l resetezi din fabrica.
Si eu am un router linksys care il tin in vitrina... cam de 3 luni.
Si eu am un router linksys care il tin in vitrina... cam de 3 luni.
- cassuftw-
- Membru, skill +2
- Posts: 618
- Joined: 17 Sep 2011, 19:08
- Detinator Steam: Da
- Location: Târgu Jiu
- Has thanked: 69 times
- Been thanked: 40 times
Incearca cu internet explorer sa accesezi: http://192.168.1.245 / http://192.168.2.2 / http://10.26.4.140 / http://192.168.1.226 / http://192.168.1.1
Edit: Accessing the Utility
There are three ways to connect to your Access Point for the first time.
1. If you have a 48VDC Power Injector (e.g. Linksys WAPPOE), power up your Access Point first, then connect the
Injector’s cable to your PC. Configure your PC to have the static IP address on the same subnet as the Access
Point’s default IP address (192.168.1.245).
2. If you have a PoE switch (e.g. Linksys SRW224P), co
nnect your Access Point and your PC to the same
network. Configure your PC to have the static IP address on the same subnet as the Access Point’s default IP
address (192.168.1.245). Or if there is a DHCP server connected to the switch, configure it to assign the IP
address in 192.168.1.0/24 subnet. Your PC will get an IP address in the subnet through the DHCP
@ http://www.cisco.com/c/dam/en/us/td/doc ... _B_web.pdf
pagina 12
Edit: Accessing the Utility
There are three ways to connect to your Access Point for the first time.
1. If you have a 48VDC Power Injector (e.g. Linksys WAPPOE), power up your Access Point first, then connect the
Injector’s cable to your PC. Configure your PC to have the static IP address on the same subnet as the Access
Point’s default IP address (192.168.1.245).
2. If you have a PoE switch (e.g. Linksys SRW224P), co
nnect your Access Point and your PC to the same
network. Configure your PC to have the static IP address on the same subnet as the Access Point’s default IP
address (192.168.1.245). Or if there is a DHCP server connected to the switch, configure it to assign the IP
address in 192.168.1.0/24 subnet. Your PC will get an IP address in the subnet through the DHCP
@ http://www.cisco.com/c/dam/en/us/td/doc ... _B_web.pdf
pagina 12
Steam profile: http://adf.ly/rr28k
- Vlad
- Fost administrator
- Posts: 8148
- Joined: 01 Dec 2011, 13:35
- Detinator Steam: Da
- CS Status: Inactiv
- Reputatie: Fost Administrator
Organizator Cupe eXtreamCS
Administratorul anului 2016; 2017 - Location: Bucuresti
- Has thanked: 116 times
- Been thanked: 161 times
Am rezolvat, l-a desfacut tata si a scos un cablu si acum il apare fara parola, dar tot nu merge setat, barem ma pot conecta la el :)).tictac wrote:Nu ai cum... daca e router cisco de ultima generatie, nu poti sa-l resetezi din fabrica.
Si eu am un router linksys care il tin in vitrina... cam de 3 luni.
-
- Information
-
Who is online
Users browsing this forum: Bing [Bot], d e a l e r -, iLuSiOn, lexz, Mafios_X, Petal [Bot], Radu eXtream, The Kalu and 150 guests